PURE M3700 Installation Manual download pdf (Page 65)

Connecting Shelves

For the 2-shelf system, you need to install an optional BUS-M card in the Basic Shelf. To connect the shelves,

plug the Bus Cable (supplied with the BUS-M card) into the bottom slot of the BUS-M card. Then, plug the

other end into the BUS-S card built in to Expansion Shelf 1.

For details about the cards, refer to "3.5.1 BUS-M Card (KX-TDA6110)" and "3.6.1 BUS-S Card".

Note

When installing or removing the BUS-M card, make sure that the DC power supply is turned off.

1. Insert the BUS-M card along the guide rails in the BUS-M Card Slot (the right-most slot) of the Basic Shelf.

Guide Rail

2. Push the release lever in the direction of the arrow so that the BUS-M card engages securely with the

connector on the back board.

Release Lever

Back Board

Document Version 2009-12 Installation Manual 65

3.2.5 Installation of Basic System or 2-shelf System (Floor Standing)

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 127 128

No comments

PURE M3700 Installation Manual Page 65