PURE M3700 Installation Manual download pdf (Page 128)

1. Connect the grounding rod to the surge protector using a grounding wire with a cross-sectional area of at

least 1.3 mm

2. Bury the grounding rod near the protector. The grounding wire should be as short as possible.

3. The grounding wire should run straight to the grounding rod. Do not run the wire around other objects.

4. Bury the grounding rod at least 50 cm (20 in) underground.

Note

• The above figures are recommendations only.

• The length of grounding rod and the required depth depend on the composition of the soil.

128 Installation Manual Document Version 2009-12

3.2.16 Surge Protector Installation

1 2 ... 123 124 125 126 127 128

No comments

PURE M3700 Installation Manual Page 128