Pure ONE Classic Series 2 User Manual download pdf (Page 16)

Language

Turn the dial to select a language (English/French/German/Italian) and push to conﬁrm

Energy saving

One Classic is part of the Pure EcoPlus product family, designed and manufactured to minimise

power consumption when the unit is switched on and in standby. One way this low power

consumption is enabled is by not collecting and storing Intellitext messages when the unit is in

standby. Two options are available:

On (default): One Classic updates the Intellitext data when you tune to a station that broadcasts

Intellitext. Intellitext data is not collected in standby.

Off: One Classic collects Intellitext data in standby from the last station viewed Intellitext, which

increases standby power consumption.

Note:

If you ﬁt the optional ChargePAK C6L or 6 x ‘C’ batteries the unit will switch off when you

press the Standby button and not enter standby, as long as the unit is not connected to

mains power.

Software upgrade

Software updates for your One Classic may be made available in the future. If you register your

product and include a valid e-mail address you will receive notiﬁcation of software updates

(register at www.pure.com/register). Available software updates are also listed at

http://support.pure.com.*

To upgrade your radio

1. Press and hold the Menu button for three seconds to access the maintenance menu.

2. Select Upgrade and follow the instructions provided with the upgrade software*.

Factory reset

Resetting your radio removes all presets, clears the station list, any Listen Later programmes

and resets all options to their defaults.

To reset your radio, select Factory reset and push the dial to conﬁrm the reset.

*Requires a PC (not Mac) with internet access running Windows XP/Vista/7 and a suitable USB cable (not included).

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

Pure ONE Classic Series 2 User Manual Page 16