Pure ONE Classic Series 2 User Manual download pdf (Page 13)

Setting the alarm & timers

Setting the alarm

1. Press the Menu button and select Alarm & timers > Alarm to display the alarm status.

2. Push the dial to enter the alarm menu. You can scroll through six alarm options on the

bottom line of the display, while the top line displays their current setting. To change a

setting, push the dial, turn it to make your selection and then push it to conﬁrm the change.

Set alarm

Push dial to choose between On (alarm sounds) or Off (alarm does not sound). The

symbol on the screen indicates that the alarm is on.

Set time

Push dial to set the alarm time. Turn the dial to set the hour then push to conﬁrm. Repeat to

set the minutes.

Set days

Push dial to set the days that the alarm sounds. Choose between: Daily (every day),

Weekday (Monday to Friday), Weekend, Saturday or Sunday or Once only (no repeat).

Set alarm mode

Push dial to choose between: Digital radio, FM or Tone (buzzer).

Select station

If you’ve set alarm mode as Digital radio or FM, choose a digital station or an FM preset

and push to conﬁrm. Last tuned tunes to the most recent station.

Alarm volume

If the alarm mode is set to Digital radio or FM, push the dial to change the alarm volume.

Turn the dial left to decrease the alarm volume or right to increase it then push to conﬁrm.

Cancelling a sounding alarm

To cancel a tone alarm push the dial or press the Standby button.

To cancel a radio alarm press any button.

Note:

A sounding radio alarm will switch off after one hour unless you cancel it.

Using alarms with ChargePAK C6L or batteries fitted

When a ChargePAK rechargeable battery or ‘C’ cell batteries are ﬁtted and the unit is not

connected to mains power the radio switches off completely when the Standby button is

pressed. In this case, the message Disabling alarm will be brieﬂy displayed after the Standby

button is pressed and the alarm will not sound.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Pure ONE Classic Series 2 User Manual Page 13