Pure BUG Too User Manual download pdf (Page 36)

Solving problems

Your Bug TOO should behave properly at all times, if it doesn’t do quite what you want check this list of common

ailments and cures. If you still have problems with your Bug TOO, either visit the support section of our website at

www.pure.com or contact us using the details on the back cover of this manual.

My Bug TOO’s not making any noise

Make sure your Bug TOO is plugged in and is switched on as explained on page 10.

Check that the volume level is not set too low, see page 12.

Check that the aerial is connected and you have done an Autotune to find digital radio stations as explained on page 12.

Check that Audio output on the Audio settings menu is not set to Audio out mode (speakers off).

EPG is slow or unavailable

At the time of writing, in the UK, EPG information is provided by some DAB broadcasters on some multiplexes. The

information available and the accuracy of the information is dependant on the broadcaster. EPG information is not

available for FM broadcasts. Depending on which multiplex you are tuned to and how good your reception is it may take

some time for EPG information to be received. Using an SD card can improve general EPG operation as it can be used

to store EPG information from one or more multiplexes and keep it up to date even if the radio is in Standby.

My Bug TOO says ‘No stations available’

Check that your aerial is connected and extended.

Use the Autotune facility to search for stations, see page 12.

Try moving your Bug TOO to find better reception.

My Bug TOO is ‘burbling’

Although DAB is excellent at providing quality audio from very little signal, the quality can suffer if the signal strength

is too low. If that happens, a ‘burbling’ sound can sometimes be heard. Make sure your aerial is fully extended and try

moving your Bug TOO to find better reception.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Pure BUG Too User Manual Page 36