PURE M3700 User Manual download pdf (Page 52)

Time

Source

Select the time server to synchronize

the time of this gateway

♦ Registrar: Get the time data from the

Registrar Server.

♦ NTP Server: Get the time data from

the NTP Server

Registrar

NTP Server Input the address if the system use

NTP server as time synchronization

source. The gateway will synchronize

with the NTP Server once a day. If the

NTP server inputted here is not

available or fail to response, the

gateway will retry it every 5 minutes.

The gateway has its own clock, so the

clock will keep going according to last

synchronization time. For NTP server

information, please refer to

http://www.ntp.org

Time Zone Select local system time zone. Select

correct Time Zone.

Time

Configuration

Daylight

saving

ON: Enable daylight saving.

OFF: Disable daylight saving.

OFF

Signaling

Port

UDP port to transfer signal packets. It

can be setting in the range of 0 to

65535. (Must reboot system to apply

changes)(Only support VuTek device)

0

protocol

RTP

Base Port

Base of UDP port to receive RTP

packets. It can be setting in the range of

0 to 65534.( Must be Even, after setting

this item, please reboot system to apply

changes)

4000

System

Restart

Restart

Mode

None: Not to restart system.

Cold restart: Cold restart.

Warm restart: Warm restart.

None

50

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 91 92

Comments to this Manuals

No comments