Pure Jongo A2 - User Guide User Manual download pdf (Page 13)

Stage 1: Connecting your setup device to Jongo

In the ﬁrst setup stage you need to establish a temporary wireless connection between your setup

device (iPod touch, iPhone, iPad, laptop or Android device) and Jongo. Your setup device needs to

include a web browser and support a Wi-Fi connection.

To create a temporary wireless network:

1. Press the WiFi button on Jongo. Jongo’s Power light will ﬂash amber.

2. On your setup device, the Jongo A2 ****** wireless network should now be visible. Select this

network. No password is required.

Once you have connected to the Jongo A2 ****** wireless network, Jongo’s Power light will

alternately ﬂash amber and green.

Stage 2: Accessing Jongo Setup Manager

Jongo Setup Manager may be displayed automatically on some devices, if not follow the steps

below:

1. On your setup device, start your web browser.

2. Enter the following address: http://myjongo

3. The Jongo Setup Manager will be displayed.

Manually connecting Jongo to your wireless network

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

Pure Jongo A2 - User Guide User Manual Page 13