PURE Marvella RO Specifications download pdf (Page 14)

24 25

FAqS

*The GKK-1/GKK-2 life of 400/800 hours approximately gives 4000/8000 litres of puried water under tested conditions

of 18 PSI input pressure, 450–500 ppm TDS and 25 °C temperature.

**Considering the device is used for 1 hour every day.

^The Germkill Kit™ (GKK-1/GKK-2) will be changed after every 400/800 hours respectively and there is an Auto Shut Off to

force this change. The Pre-Sediment Filter will be required to be replaced after approximately every 200 hours (approx 2000

litres). Depending on your water quality there may be a need to change the Pre-Sediment Filter before 200 hours.

PURITY

INDICATOR

TANK FULL

INDICATOR

TANK

FULL

TDS IN TDS OUT

TANK

FULL

Zero

Very low

Low

Moderate

High

Very high

Low

Moderate

High

Very high

Extremely high

TDS range

represented

TDS range

represented

Germkill Kit 2

Life Indicator

Germkill Kit 1

Life Indicator

Purity

Indicator

Purity

Indicator

UNDERSTANDING THE DIGITAL

DISPLAY PANEL

CHANGE

GKK 1

CHANGE

GKK 2

GUIDED ALERT

SYSTEM

The central bars of the inner/outer indicator circle will

blink after ~185/~585 hours of usage respectively, to

prompt you to replace the Pre-Sediment Filter and it will

Auto Shut Off water at 200/600^ hours of usage respectively

if not replaced.

As the purier approaches ~385 hours of life, you will see the

last bar of the Germkill Kit 1 indicator blink, ‘CHANGE GKK’

blink at the centre of the Digital Display Panel and "CALL

1860-180-1000" illuminated at the bottom of the panel. On

completion of 400 hours* ‘CHANGE GKK’ will be static on

the panel. You would need to replace the Germkill Kit 1 by

contacting the Pureit Helpline at 1860-180-1000.

Blinking “Change GKK” - Alerts 15 days** before you

need to change Germkill Kit 1. Buy GKK 1.

Static “Change GKK” - Auto Shut Off of water.

Replace GKK 1.

As the purier approaches ~785 hours of life, you will see the

last bar of the Germkill Kit 2 indicator blink, ‘CHANGE GKK’

blink at the centre of the Digital Display Panel and "CALL

1860-180-1000" illuminated at the bottom of the panel. On

completion of 800 hours* ‘CHANGE GKK’ will be static on

the panel. You would need to replace the Germkill Kit 1 by

contacting the Pureit Helpline at 1860-180-1000.

Blinking “Change GKK” - Alerts 15 days** before you

need to change Germkill Kit 2. Buy GKK 2.

Static “Change GKK” - Auto Shut Off of water.

In case of specic electrical faults, a segment of the red band

will illuminate to indicate where the fault is.

How does Pureit Ultima RO + UV purify water?

Pureit Ultima RO + UV has a 6-Stage Purication System

which ensures you get water that is ‘As Safe As Boiled

Water™’ and also removes excess total dissolved solids

(TDS) to make your water tastier.

In the rst stage, the water passes through the

Pre-Sediment Filter which removes ne and coarse

particulate impurities/dirt.

The second stage is the Pre-RO Carbon Filter that

removes chlorine and organic impurities like harmful

pesticides. It also adsorbs bad taste and odour-causing

organic compounds from water.

The third stage is the Post-Carbon Sediment Filter which

removes the remaining dirt.

Then the water passes through the RO Membrane at

high pressure, with the help of an inbuilt pump. The RO

Membrane removes dissolved salts, hardness, pesticides

and heavy metals like arsenic, lead and mercury. It also

removes microbial contaminants like bacteria, virus,

protozoa and parasites.

After the RO Membrane, the water passes through a

TDS Modulator that adds adequate quantities of essential

minerals to the water.

Fifth stage is a high-intensity UV lamp that acts as an

additional stage of purication to further inactivate

bacteria, virus and parasites to deliver safe water.

Sixth and nal stage is the Post-RO Carbon Filter, which

acts as a polisher and enhances the taste of puried

water.

What is the storage capacity of ‘Pureit Ultima

RO + UV’?

Ultima RO + UV has a storage tank capacity of 10 litres

with running input water. With no continuous input

water, the average dispense capacity is 9.2 litres. The

process of lling the storage tank is fully automatic and

when you take water out of the tank, the purication

process automatically starts and rells the storage tank.

How much time it takes to purify water in ‘Pureit

Ultima RO + UV’?

‘Pureit Ultima RO + UV’ can purify water upto

9–12 litres per hour. However, the time taken to purify

depends on the life of the Filters, the input water

pressure, TDS and other impurities present in water.

How will I get new Consumables/Membranes

replaced?

You need to call the Pureit Helpline and order for a

Germkill Kit

. Our technician will visit your place and

replace the Germkill Kit

at a nominal cost.

Can I drink the rst purication cycle of water

from the purier?

After Pureit Ultima RO + UV is installed or whenever

the Germkill Kit (s) are replaced, discard the rst cycle

of water (10 litres) that is lled in the storage tank.

What should I do if there is no water being

dispensed from the tap?

In case you cannot dispense water from the tap, then

you need to rst check whether the power supply is

on. If it is on, then check if there are any fault indicators

illuminated, or "CHANGE Germkill Kit" and the Call

Centre Number is illuminated on the Digital Display

Panel. Call the Pureit helpline and get either the fault

resolved or Germkill Kit replaced.

If none of these lights are illuminated on the Digital

Display Panel, then check if the Ball Valve is closed.

If none of these cases are true, then please call Pureit

Helpline for assistance.

Can I open and service my purier?

It is not recommended to open and service device by an

individual. Call our Pureit Helpline if you face any issue

which requires servicing and opening the device.

Can I use any type of water to purify through

my Ultima RO + UV?

Pureit Ultima RO + UV will purify “potable” water for

removal of hardness and other impurities to give you safe

drinking water. If the input water has impurities normally

not present in drinking water (high iron/turbidity/

microbial contamination etc.) or water is from unknown

source (river/lake/pond/borewell etc.) then suitable

pre-treatments may be required.

SF CHANGE

INDICATOR

Replace GKK 2.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

PURE Marvella RO Specifications Page 14

Comments to this Manuals

Related products and manuals for Water dispensers PURE Marvella RO