PURE M3700 User Manual download pdf (Page 6)

On the last picture above you can see where the 8 faders are attached to the console. You need to disconnect them

by pulling the sockets to the front while applying a little pressure from the right side. It should not be difficult. If you

can’t get them loose easily, you’re doing something wrong and might damage the connector or PCB. Anyway, cleaning

the 8 channel fader module was a lot easier than the channelstrip module although you need to be careful removing

the 16 screws that attach the faders to the cover. You need a small philips screwdriver. Be careful not to ruin the

heads, some screws may only unwillingly come loose.

1 2 3 4 5 6 7 8 9 10 11 ... 30 31

No comments

PURE M3700 User Manual Page 6