PURE TEMPUS-1 Specifications

10Storing and selecting presetsThe numbered buttons and enable you to assign up to ten radio stations to presets for easy one-touch access. You can

11When finished, press the menu button or wait a moment and you’ll return to your idle display mode. If your display mode is set to Clock you will see

12Recording from your TEMPUS-1You can record from your TEMPUS-1 using the Stereo Out or Digital Out sockets. You can also set a record timer to automa

13Changing the display settingsYou can change the screen brightness and choose to switch the backlight on or off in standby mode using these settings.

14Remove the small plugs from the sockets and connect the Digital Out socket to the Digital-in socket on your amplifier or recorder using an optical c

15Upgrading your softwareYou can upgrade the software in your TEMPUS-1 using a PC connected to the USB connection on the rear panel. To install an upg

16Hints and tipsThis section provides information on advanced DAB features and offers advice which may help if you are having problems with your TEMPU

17TroubleshootingThis section gives some of the most likely solutions to problems you might have with your TEMPUS-1.I can’t hear the station I have se

18Improving receptionAlthough DAB is excellent at providing quality audio from very little signal, the quality can suffer if reception is poor. A numb

191. Telescopic aerial Optimise the position of your telescopic aerial by extending it as high as pos si ble and pointing it vertically. Use the tu

CopyrightCopyright 2003 by Imagination Technologies Limited. All rights reserved. No part of this publication may be copied or distributed, transmitte

20Resetting your TEMPUS-1A option is provided to enable you to reset your unit. This removes all presets, stored stations, alarms, record timers and f

21AccessoriesPURE Digital supply a range of accessories and complementary products for your TEMPUS-1 including a matching ST-1 auxiliary speaker for s

22Technical specificationsGeneral Stereo digital radio (stereo output requires optional auxiliary speaker, headphones or external amplifier) with fu

Please return your registration card to the following address to validate your warranty.PURE DigitalImagination Technologies Ltd.,Imagination House,Ho

3ContentsIntroduction ...4Unpacking ...

4IntroductionThank you for choosing the PURE TEMPUS-1 digital radio.TEMPUS-1 offers the same digital-quality, interference-free audio as EVOKE-1, the

5Overview diagrams Autotune button provides one-touch tuning Standby button switches between standby mode and power on Sleep button sets TEMPUS-1 to e

6Quick start This section provides information on how to set up and start using your TEMPUS-1.1 Fully extend the telescopic aerial, connect the

7Using your TEMPUS-1Switching on and offBefore switching on, extend your aerial, connect the power adapter and check that the volume is turned down.Wh

8Changing stationsYou change stations using the Tune knob. If you have assigned stations to presets you can also select them by pushing the relevant n

9Changing the information displayedPress the Info button and repeat to cycle through the eight display modes. These modes affect what you see on the s